Fleece Fabric Dyeing Method
Actually the dyeing process of
fleece fabric same as like others fabric, only in the fabric finishing we used
some extra process. Please find below the dyeing process
Fabrication: 100% cotton, One side brush
fleece, 260 GSM.
A) Dyeing
1st Step: Scouring
(detergent wash) the fabric in the dyeing winch and released the
water for perform the next process.
2nd Step: Labeling the fabric
by labeling agent which increased the PH of fabric.
3rd Step: Soda / Salt wash.
4th Step: Mixing the specific
color (reagent) for dye the fabric. Or if fabric color is white then we
used brightener chemical in this step. And step 06 is not require for
white color fabric.
5th Step: Acid washes
(after released color mixing water)
6th Step: Color fixing by
fixer.
7th Step: Softener.
B) Finishing
For tube form
8th Step: Squeezer
9th Step: Dryer.
10th Step: Brush inside (terry
side) with brushing machine.
11th Step: Compacting
For open width fabric
8th Step: Slitting
9th Step: Stentering (For Dia
adjust)
10th Step: Brush inside (terry
side) with brushing machine.
11th Step: Stentering
12th Step: Compacting (For
length wise shrinkage control)
Now the fabric is ready for cutting. Please test the Shrinkage,
Color shade, Gsm before start cutting.