Fabric dyeing process of Single Jersey Average Color
Dyeing process of S/J Avg Clr (Any GSM)
Dyeing Process
Fabrication: 100% cotton,
Single Jersey, Average Color, Any GSM
A) Dyeing
1st Step: Scouring (detergent wash) the fabric in
the dyeing winch and released the water for perform the next
process.
2nd Step: Labeling the fabric
by labeling agent which increased the PH of fabric.
3rd Step: Soda / Salt wash.
4th Step: Mixing the specific color (reagent) for dye
the fabric. Or if fabric color is white then we
used brightener chemical in this step. And step 06 is not require for
white color fabric.
5th Step: Acid washes (after released color
mixing water)
6th Step: Color fixing by fixer.
7th Step: Softener.
B) Finishing
For tube form
8th Step: Squeezer
9th Step: Dryer.
10th Step: Shrinkage Report (Optional)
11th Step: Tube Compacting
10th Step: Shrinkage Report (Optional)
11th Step: Tube Compacting
For open width fabric
8th Step: Slitting
9th Step: Stentering (For Dia adjust)
10th Step: Open Compacting (For length wise shrinkage control)
9th Step: Stentering (For Dia adjust)
10th Step: Open Compacting (For length wise shrinkage control)
Now the fabric is ready for cutting. Please test the Shrinkage,
Color shade, Gsm before start cutting